







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling in Lancaster: What to Know First
KraftMaid kitchen remodeling in Lancaster typically runs $14,000 – $45,000 for a full remodel, and most projects take three to six weeks from demolition to final walkthrough. We provide independent KraftMaid kitchen remodeling across Lancaster, Antelope Valley, and the surrounding high-desert communities – we’re not affiliated with or authorized by KraftMaid, but we work on their cabinetry every week and we quote a flat written price before anyone picks up a tool.
This page is for homeowners who already have KraftMaid cabinets and want to know what they’re working with before they hire anyone: which series hold up, which ones don’t, what fails first in Lancaster’s climate, and what a realistic budget looks like. Call (844) 797-3312 to schedule a free estimate.
How KraftMaid Products Fail – and How We Fix Them
KraftMaid builds a solid cabinet. But Lancaster homes put them through things the factory in Middlefield, Ohio never tested for. Our technicians have up to 19 years of experience, and here’s what we actually see on KraftMaid jobs in the Antelope Valley.
- Painted finishes on Vantage and Portrait series cabinets checking along door edges. Lancaster’s summer humidity swings – single-digit in June, monsoon moisture in August – expand and contract the wood frame faster than a painted MDF panel can follow. We see hairline cracks along the stile corners and around raised-panel edges on five-to-ten-year-old Vantage doors. The fix isn’t a repaint. We sand back to bare wood, prime with a shellac-based sealer, and topcoat with a cabinet-grade enamel rated for that range of movement.
- Particleboard box sides swelling around the dishwasher and sink. Every KraftMaid line from the entry Vantage through the mid-tier Portrait uses particleboard for the box. In Lancaster, a slow leak under the sink or a dishwasher venting steam into a toe-kick over three summers will swell a box side by a quarter inch. By the time the door stops closing square, the box is already compromised. We replace the affected boxes rather than shim the hardware – shimming buys you six months.
- Drawer-glide sag on full-extension under-mount slides with heavy loads. KraftMaid’s standard full-extension slides are rated well, but Lancaster’s dry air lets the wood cookware drawer box shrink slightly and the slide loses its preload. We upgrade to soft-close undermounts with a higher load rating – this is one of the few places where a quality aftermarket part outperforms the OEM replacement.
- Face-frame separation on 1990s and early-2000s KraftMaid installs. Homes built during the Antelope Valley’s big building run have cabinets that have gone through 25-plus dry summers. The glue joint between the face frame and the box dries and pulls. We don’t try to glue and clamp a compromised joint in place – we pull the cabinet, re-glue and re-clamp on the bench, add a corner block, and reinstall.
- Door warpage on raised-panel doors in west-facing kitchens. Lancaster’s afternoon sun through a west-facing window hits 120°F on the interior glass. A raised-panel KraftMaid door on the wall nearest that window will cup over four or five summers. We swap to a flat-panel or shaker door with vertical-grain construction on just the sun-facing run, and leave the rest as-is.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our KraftMaid Kitchen Remodeling Process
Every KraftMaid job follows the same sequence, and every step is documented in the photo record you get when we leave.
- 1
Diagnostics. We open every cabinet, pull the drawer, check the box sides for swelling, and look at the face-frame joints under a flashlight. We photograph every finding. You get the photos the same day.
- 2
Parts decision. For each component, we tell you honestly whether an OEM KraftMaid replacement or a quality aftermarket part is the better call – and why. OEM matters for doors and face frames where the finish and profile have to match. Aftermarket usually wins for slides, hinges, and soft-close dampers.
- 3
Written quote before work starts. Under Clause 1 of the Haven Standard, the flat price and written scope are in your hands before we touch a cabinet. No “we’ll see when we get in there.” No change order without your signature.
- 4
The work. Box replacements, door swaps, slide upgrades, refacing or full replacement depending on what the diagnostics found. We protect the floor and the countertops, and we keep the kitchen functional as long as we can during the rebuild.
- 5
Test and walkthrough. Every door closes flush. Every drawer opens smooth. Every slide returns. We walk you through the whole kitchen and re-check the photo record against the finished job.
- 6
365-Day Done Right Promise. If something we touched isn’t right within a year, we come back and make it right. The guarantee is printed, not implied.
See the difference
Before
After
Before
After
Before
AfterWhat KraftMaid Kitchen Remodeling Costs in Lancaster

These are the real ranges we quote in Lancaster – not national averages, not teaser pricing.
- Full Kitchen Remodel: $14,000 – $45,000
- Small Kitchen Remodel: $9,000 – $20,000
- Cabinet Installation (including KraftMaid replacement or new install): $4,000 – $13,000
- Countertop Installation: $2,000 – $6,500
- Backsplash Installation: $800 – $2,500
- Kitchen Island Installation: $3,000 – $10,000
The biggest cost drivers in Lancaster are box replacement (each box is a carpentry job in itself), whether the existing countertops survive the cabinet work, and whether you’re moving plumbing or gas. A cosmetic reface on a sound KraftMaid box lands near the low end; a full replacement with new counters, sink, and island lands near the top. Call (844) 797-3312 for a free estimate – the number comes to you in writing, before any work starts.
Why Lancaster Homeowners Call Rowan Construction Group Lancaster for KraftMaid Work
Because we’ve been doing this since 2007 – 4,000-plus projects, every one quoted in writing before work started – and because we can tell you the difference between a Vantage box and a Portrait box without looking it up. Our technicians are background-checked and uniformed, a live person answers the phone 24/7, and every visit includes a documented photo record as a standard deliverable, not an add-on.
We also work alongside KraftMaid cabinetry with Kohler fixtures, GAF and Owens Corning roofing, PGT windows, and Master Halco fencing when a Lancaster kitchen remodel opens up into a bigger project. Bring us a competitor’s written estimate and we’ll review it line by line at no charge – that’s our Free Second Opinion, and it’s a standing offer. Under the 365-Day Done Right Promise, backed by The Haven Standard, if it isn’t done right, we make it right.
FAQs

Not if the cabinets are handled properly. KraftMaid’s limited warranty covers manufacturer defects in materials and workmanship, but it does not cover damage from improper installation, moisture intrusion, or modification by an unauthorized party. Working on KraftMaid cabinets doesn’t void the warranty by itself – what voids it is substandard work that damages the cabinet. We install and modify KraftMaid cabinets to manufacturer specification, and we tell you upfront when a repair would fall outside warranty coverage so there are no surprises. Call (844) 797-3312 for a free estimate and we’ll walk you through what your specific KraftMaid series covers.
Yes, for current production lines. KraftMaid’s current series – Vantage, Portrait, and the recessed-panel and raised-panel door styles they still make – can be ordered through distribution. The harder case is a discontinued finish or a door profile that’s been retired; in those situations we tell you honestly whether a color-matched refinish is the better path or whether it’s time to reface the entire run for consistency. Either way, the parts decision is in the written quote before we order.
Replace the boxes, keep the doors, if the doors are sound. KraftMaid boxes – like most production cabinet boxes – are particleboard, and once a box side has swollen from moisture or a face-frame joint has separated from age, no repair makes it right for the long haul. But the doors and drawer fronts are usually still good, and matching the finish is worth a lot. We’ll tell you in the diagnostic which parts need replacing and which don’t, and the written quote reflects exactly that.
Three to six weeks for a full remodel, depending on scope. A cabinet-only replacement is faster – usually one to two weeks. A cosmetic reface with door swaps and slide upgrades can be a few days. The schedule is in the written scope with the price, and no change proceeds on a change order you haven’t signed, so the timeline doesn’t drift mid-job.
Yes, when the work requires one. Cabinet replacement alone typically doesn’t require a permit, but moving plumbing, gas, or electrical does – and Lancaster’s building department enforces that. We pull the permit, schedule the inspection, and pass it. That’s in writing before work starts. Call (844) 797-3312 for a free estimate and we’ll tell you whether your KraftMaid job needs one.
Written by the team at Rowan Construction Group Lancaster, serving Lancaster and nearby areas.












